When printing labels it can be very
inefficient to only use a small percentage of the printer's maximum width. Our range of slitter rewinders allow you to use
utilise a much greater percentage of ribbon thus saving money.
Overall printing time is also reduced by using multi-across-the-web
labels.
Note: Both units can be used a standard rewind
units.
Slitting can be performed inline (direct
from a printer) or Off-Line (Reel-to-Reel). Simple to set-up
and operate.
Features
of the 3D150SL Universal Label Slitter/Rewinder:
Compact
design - rewinder, unwinder and slitter integrated
in to the single unit.
Reliable
and Robust (designed and manufactured
to the highest standards within the UK)
Handles
label reels up to 6" wide and 12"
diameter
Reel
Tension Control
On-line
(from printer) and Off-line
(Reel-to-Reel) Rewind capability.
Inside/outside
wind selector (control easily accessible on
top of unit)
Variable
speed control up to 25m/min (76mm core)
Ability
to change reel core size (e.g. 76mm to 44mm,
44mm to 76mm)
Dancing
Arm Control (eliminates all stress on the
printhead and increases printhead life)
Universal
rewind mandrel for winding on to coreless,
44mm or 76mm cores
Compatible
with all thermal/thermal transfer printers
(up to 35m/min)
Slitter
Unit- up to 4blades (for 5 across
labels)
Direct
drive motor with dynamic braking (no unreliable
clutch and brake mechanism)
Optional
Reel Guide
Optional
High-Speed Label counter
option
Designed
and Manufactured in the U.K. (we hold a complete
stock of spares available at a moments notice)
Advice:
When choosing either the 3D150SL of
3D1090SL label rewinder you should consider the
following:
Maximum reel
size (width, outside diameter)
What size cores
do you want to wind on to (44mm, 76mm etc)
